GEL maintenance free Non Spillable 2v sealed rechargeable battery
120AH High Capacity
The unique construction and sealing techniques of the battery
proof operation in any position with no adverse effect to capacity
or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting
of a high
porosity, glass fiber material which in conjunction with plates,
totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas
induces recombination of more than 99% of gases generated during
Maintenance Free Operation
Due to the perfectly sealed construction and the recombination of
the cells, the battery is almost maintenance free.
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence,
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from CGB CB
batteries, dependent on the average depth of discharge.
Float Service Life
SE and CB, HR Series batteries have an expected life span of 3 to 5
float service applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of
capacity per month.
CGB Batteries may be operated over a broad range of ambient
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep
|Nominal Voltage||12V||Capacity||C10||120Ah (10.5V, at 25℃)|
|Nominal Capacity (C10)||120Ah (10.5V,at 25℃)||C5||96Ah (10.5V, at 25℃)|
|Dimension||Length 407mm||C3||90Ah (10.5V, at 25℃)|
|Width 173mm||C1||66Ah (10.2V, at 25℃)|
|Height 209.5mm||Internal Resistance||Approx. 5 mΩ (25℃)|
|Total Height 234.5mm||Max Short-duration Discharge Current||2400A(25℃)|
Designed life for floating charge is 5 years (20℃)
Design with flat plate, GEL electrolyte and AGM separator
GEL electrolyte inside of battery keeps uniformity condition,
battery is with
excellent cycle life
GEL electrolyte has huge thermal capacity, thermal runaway
High strength ABS material for container & lid
Wide temperature scope of application(-15~45℃)
Best temperature of application(20±5℃)
No leaking, safe and reliable
Standing or lying down for using, convenient to transport and
Low self-discharge rate.
Batteries should be stored in dry and clean warehouse which has
exchange system. Batteries should avoid direct sunlight. Batteries
be near to heat (such as radiator, the distance should more than
should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before
Charging methods: maximum charging current 3.0A, constant voltage
Charging time: 15~20h; Temperature compensation coefficient: